Metering
Modem

MTMD/MTMT

Device Description

MET radio device for remote reading of energy consumption, built to provide a complete suite of features that guarantee a continuous performance monitoring of the system, in turn allowing to implement logics that make continuous improvements.

The device allows the reading of consumption from energy meters (single-phase or three-phase) and/ or flow (water, gas). Met has an RS485 interface with Modbus RTU protocol for communication with the energy meter and two inputs for interface with pulse meters. Using the URBANA DEVICE TOOLKIT software and the EASYCONF firmware module, you can configure the desired pulse interfaces, RS485 interface and Modbus registers.

The device monitors the correct interfacing with the external meter via RS485 interface and periodically provides the data related to resource consumption, according to the parameters defined in the configuration phase.

It is designed to be installed inside electrical panels with din bar.

The radio communication interface follows the standard LoRaWAN® 1.0.3 (class C), which is a low-powered and long-ranged communication technology. The LoRaWAN® technology provides the best in class radio communication performance in terms of reliability, scalability and overcoming obstacles with low energy consumption.

MET is designed to operate in the temperature range -30~+85 C and has IP20 degree of protection.

It complies with EN 55024:2010-11, EN 55024/A1:2015-06, EN 60950-1:2006-04, EN 60950- 22:2006-04, EN 55032:2015-07, EN 61000-3-3: 2013-08, ETSI 301 489-1:2017-02.

The device allows automatic commissioning via the URBANA TOOLKIT mobile application, available on the Apple App Store and Google Play Store, with easy-to-use QUICKSCAN procedures. The programming of the functions is done through the URBANA EFFICIENCY PLATFORM.

Measured Values Recorded

PULSE MONITORING

DATA HISTORY

REAL-TIME DATA

Device Documentation

Consult the documentation to access
technical and assembly information.

DatasheetInstallation ManualDevice Family

Urbana Toolkit App

Device commissioning

Urbana Toolkit is Urbana’s smartphone and tablet app that allows you to install, configure and locate devices in just 4 steps. This tool has an essential layout and guarantees ease of use during the installation process by summarizing the phases in a simple and effective way.

1
SCAN QR CODE

To proceed with the installation and registration of the device, you need to access the app with your user and start the configuration by scanning the Qr code present on all the devices integrated by Urbana.

2
SET GROUP AND LOCATION

It then continues with the assignment of a membership group and geolocation. With the first function it is possible to have a hierarchical and detailed cataloging on the platform. With the second the exact positioning is given to the device.

3
ADD DEVICE’S DETAILS

To complete the installation of the device it is necessary to add the name and other specifications based on the type. This section also displays all technical information.

4
COMPLETE

Once all the previous steps have been correctly completed, the device is active and ready to process data ensuring maximum performance.